GENERAL SPECIFICATIONS FOR
ADAMS METAL DETECTOR PRODUCT RANGE
ADAMS METAL DETECTOR PRODUCT RANGE
AD Series General Specifications:
AD10-2 AND AD11-2: Length: 362mm. Width: 55mm. Height: 30mm Weight: 262grms.(including battery) Sensitivity: Automatic – factory preset sensitivity.
AD16: Length: 360mm. Width: 105mm (probe) Body: 55mm. Height: 35mm. Weight: 280grms. (including battery) Sensitivity: Factory pre-set - Automatic
AD17 (AD14): Length: 360mm. Width: 105mm. (probe) Body: 55mm. Height: 35mm. Weight:
280grms (including battery) Sensitivity: High factory pre-set Turbo sensitivity – HIGH/STANDARD
AD15 (AD18): Length: 360mm. Width: 105mm. (probe) Body: 55mm Height: 35mm Weight:
280grms. including battery Sensitivity: High Sensitivity – Fully Adjustable -Turbo Control. HIGH/REBAR ILLIMINATION
Technical Specifications:
Operational Frequency: 20Khz
Audio Frequency: 3.4 Khz
Operating temperature: -20C to +65C
Storage temperature: -30C to +80C
Protection of unit against environmental conditions and waterproofing to IP64 (lEC 529)
Humidity: 98%
Battery condition monitoring. A prolonged alarm signals need to replace battery. When battery is exhausted a continuous audio/visual LED signal is produced.
Alarm indication by means of piezo audio alarm and High intensity LED
. Sound: Switchable Audio/Visual & Visual only (AD11-2) & or Vibration / Audio Visual Alert (AD11-V). Battery inserted “cartridge” style - no wires or connectors.
Battery: 9volt block battery can be either replaceable 9volt 550mA hours
or 280 hours normal use Optional rechargeable NiCad 180mA hours
Instant response to all metals.
Size of target indication: At constant sweep speed: short digital pulse = small target. Long pulse = large target
Complies to all international standards.
2 year warranty on all models specification subject to change without notice.
Ultra Series Specifications:
AD2600S / AD2300 / ER3000 / AMR-11
Dimensions: Length: 360mm. Width: 105mm (probe). Body 55mm. Height: 35mm
Weight: 295grms including battery
Sensitivity: Super High-adjustable sensitivity (except model AD2300 – fully automatic – Factory pre-set) (Model AMR-11): Programmable sensitivity adjustment of ELEVEN (11) individual settings
Operating Frequency: 20 kHz
Audio Frequency: – 3.4Khz
Operating Temperature: -20c to +65c
Humidity: 98%
Ingress Protection: IP64 (IEC 529) (Waterproofing & environmental protection)
Power Consumption: Alarm Mode Current (metal detected): 6.5mA
Operating Time: 360 hours continuous at +25C (alkaline battery) Or 100 hours continuous at +25C (rechargeable battery single charge) Battery: 9 Volt block battery MN1604, 6LR61 or equivalent alkaline disposable or rechargeable. Full Battery Management System - Precision monitoring. Low voltage
is signaled in two stages: Yellow LED lights warning the user that the battery will need replacing or recharging in the near future. When the battery is exhausted a continuous audio and Red + Yellow
visual alarm signal is produced. Alarm indication by means of audio alarm and High intensity L.E.D. (AD2600S Audio/Visual & Visual only) Speed of detection: Ultra fast; `Detect - alarm - reset’ ready
for another target - 0.1 second. Size of target indication: At constant sweep speed: short digital
pulse = small target. Long pulse = large target. Battery inserted “cartridge” style - no wires or connectors for greater reliability. Instant response to all metals – Ferrous and Non-Ferrous
3 year warranty on all models specification subject to change without notice
AD10-2 AND AD11-2: Length: 362mm. Width: 55mm. Height: 30mm Weight: 262grms.(including battery) Sensitivity: Automatic – factory preset sensitivity.
AD16: Length: 360mm. Width: 105mm (probe) Body: 55mm. Height: 35mm. Weight: 280grms. (including battery) Sensitivity: Factory pre-set - Automatic
AD17 (AD14): Length: 360mm. Width: 105mm. (probe) Body: 55mm. Height: 35mm. Weight:
280grms (including battery) Sensitivity: High factory pre-set Turbo sensitivity – HIGH/STANDARD
AD15 (AD18): Length: 360mm. Width: 105mm. (probe) Body: 55mm Height: 35mm Weight:
280grms. including battery Sensitivity: High Sensitivity – Fully Adjustable -Turbo Control. HIGH/REBAR ILLIMINATION
Technical Specifications:
Operational Frequency: 20Khz
Audio Frequency: 3.4 Khz
Operating temperature: -20C to +65C
Storage temperature: -30C to +80C
Protection of unit against environmental conditions and waterproofing to IP64 (lEC 529)
Humidity: 98%
Battery condition monitoring. A prolonged alarm signals need to replace battery. When battery is exhausted a continuous audio/visual LED signal is produced.
Alarm indication by means of piezo audio alarm and High intensity LED
. Sound: Switchable Audio/Visual & Visual only (AD11-2) & or Vibration / Audio Visual Alert (AD11-V). Battery inserted “cartridge” style - no wires or connectors.
Battery: 9volt block battery can be either replaceable 9volt 550mA hours
or 280 hours normal use Optional rechargeable NiCad 180mA hours
Instant response to all metals.
Size of target indication: At constant sweep speed: short digital pulse = small target. Long pulse = large target
Complies to all international standards.
2 year warranty on all models specification subject to change without notice.
Ultra Series Specifications:
AD2600S / AD2300 / ER3000 / AMR-11
Dimensions: Length: 360mm. Width: 105mm (probe). Body 55mm. Height: 35mm
Weight: 295grms including battery
Sensitivity: Super High-adjustable sensitivity (except model AD2300 – fully automatic – Factory pre-set) (Model AMR-11): Programmable sensitivity adjustment of ELEVEN (11) individual settings
Operating Frequency: 20 kHz
Audio Frequency: – 3.4Khz
Operating Temperature: -20c to +65c
Humidity: 98%
Ingress Protection: IP64 (IEC 529) (Waterproofing & environmental protection)
Power Consumption: Alarm Mode Current (metal detected): 6.5mA
Operating Time: 360 hours continuous at +25C (alkaline battery) Or 100 hours continuous at +25C (rechargeable battery single charge) Battery: 9 Volt block battery MN1604, 6LR61 or equivalent alkaline disposable or rechargeable. Full Battery Management System - Precision monitoring. Low voltage
is signaled in two stages: Yellow LED lights warning the user that the battery will need replacing or recharging in the near future. When the battery is exhausted a continuous audio and Red + Yellow
visual alarm signal is produced. Alarm indication by means of audio alarm and High intensity L.E.D. (AD2600S Audio/Visual & Visual only) Speed of detection: Ultra fast; `Detect - alarm - reset’ ready
for another target - 0.1 second. Size of target indication: At constant sweep speed: short digital
pulse = small target. Long pulse = large target. Battery inserted “cartridge” style - no wires or connectors for greater reliability. Instant response to all metals – Ferrous and Non-Ferrous
3 year warranty on all models specification subject to change without notice
AD360 Specifications:
Operating Frequency: 20Khz
Length (including probe): 24cm (9.3 inches) (Including battery cap
Diameter: Probe end: 2.5cm (0.98 inches) Handle End: 4.4 cm (1.73 inche)
Weight: 219grams (7.75 Ounces) Including Battery .
Power Source: 1 x 9 volt block alkaline or rechargeable battery
Alarm Indicator: Vibration alarm (in handle) - Power indicator: Green colored flashing LED
Search Sensor: Detection area that is the entire length, circumference and tip of the detection probe Sensitivity: High definition – 360 degree & Pin Point sensitivity – Fully Automatic – Factory Pre-set Battery Life: Standard 9 Volt Alkaline MN1604): 380 hours. Optional Rechargeable NiMh: 80 Hours. Power Operation – Mil spec On/Off: Rugged single pushbutton latching switch. Ingress protection (dust and moisture protection and resistance): IP66
Case Construction: High impact ABS with rubberized handle grip
Conform to all International Standards
Warranty: 24 months Limited warranty.
AX777 Specifications:
Construction: Polycarbonate, aluminum and ABS.
Probe Dimensions: Diameter: 8 inches.
Height: Complete length in (short mode) 99.5 cm (39.17 inches) - Handel to floor (short mode) 75cm (29.5 Inches) - Handle to floor Fully extended: 145cm (56 inches) fully extended.
Weight: 48.2 oz – 1.5kg (including battery)
Sensitivity: Fully adjustable high sensitivity.
Operating Temp: -20C to +65C
Storage Temp: -30C to +80C
Hu8m%idity: 9
Ingress Protection: [IP64 (IEC 529) CONTROL PANEL] – [SEARCH PROBE – SUBMERSIBLE]
Power Source: One Standard 9 Volt alkaline (MN1604, 6LR61 or equivalent disposable or rechargeable block battery. Loaded “Cartridge style”. Operation to “ON” mode by on/off rocker switch.
Power Consumption:
Active Mode Current: Less than 1mA (No detection)
Alarm Mode: 6.5mA (audio/visual mode)(Metal detected)
Battery Management: Precision battery monitoring. Yellow L.E.D indicator on main control panel signals low power. Continuous Red and Yellow LED indicate expired battery (In alarm mode)
Battery Life: Battery life from 1 single 9volt battery up to 360 Hrs., continuous use in audio/visual mode. (Standard Alkaline) (100 Hrs. NiCad Rechargeable) Please note: Vibration mode will run battery down faster than Audio/Visual mode).
Alarm Indication: Alarm indicated in two modes with 2-way rocker switch
(a) Audio Visual (beeper and Red LED) (b) Vibration only (tactile vibration from the handle
of the detector to the hand of operator. Detector beeps only when metal is present.
Detection Speed: Ultra fast Detect – Alarm and Reset – ready for another target: 0.1 seconds.
Target Size Indication: At constant sweep speed: short alarm = small target –
Long alarm = larger target.
Controls: (a) On/Off rocker switch (green flashing LED indicates ON mode) (b) Red LED indicates alarm mode. (c) Yellow LED indicates battery power is low and needs changing or re-charging. (d) Two way switch changing between A/V (Audio/Visual) and VIB (Vibration mode) (e) Miniature sensitivity adjustment knob.
Target Types: Detects all metals including alloys, with Instant response to all metals.
Testing: (a) Tested and approved to EEC EN5008-1 Table 1. EN50082-1 Table1:1.1 radiated emissions (CE marked). (b) Conforms to international standards IEC, NILEC, FCC, FAA. (c) Medically tested – No risk to persons with pacemakers. d) Non-interference with magnetic recorded material.
Operating Frequency: 20Khz (Sensor)
Audio Frequency: 3.4 Khz
Operating Frequency: 20Khz
Length (including probe): 24cm (9.3 inches) (Including battery cap
Diameter: Probe end: 2.5cm (0.98 inches) Handle End: 4.4 cm (1.73 inche)
Weight: 219grams (7.75 Ounces) Including Battery .
Power Source: 1 x 9 volt block alkaline or rechargeable battery
Alarm Indicator: Vibration alarm (in handle) - Power indicator: Green colored flashing LED
Search Sensor: Detection area that is the entire length, circumference and tip of the detection probe Sensitivity: High definition – 360 degree & Pin Point sensitivity – Fully Automatic – Factory Pre-set Battery Life: Standard 9 Volt Alkaline MN1604): 380 hours. Optional Rechargeable NiMh: 80 Hours. Power Operation – Mil spec On/Off: Rugged single pushbutton latching switch. Ingress protection (dust and moisture protection and resistance): IP66
Case Construction: High impact ABS with rubberized handle grip
Conform to all International Standards
Warranty: 24 months Limited warranty.
AX777 Specifications:
Construction: Polycarbonate, aluminum and ABS.
Probe Dimensions: Diameter: 8 inches.
Height: Complete length in (short mode) 99.5 cm (39.17 inches) - Handel to floor (short mode) 75cm (29.5 Inches) - Handle to floor Fully extended: 145cm (56 inches) fully extended.
Weight: 48.2 oz – 1.5kg (including battery)
Sensitivity: Fully adjustable high sensitivity.
Operating Temp: -20C to +65C
Storage Temp: -30C to +80C
Hu8m%idity: 9
Ingress Protection: [IP64 (IEC 529) CONTROL PANEL] – [SEARCH PROBE – SUBMERSIBLE]
Power Source: One Standard 9 Volt alkaline (MN1604, 6LR61 or equivalent disposable or rechargeable block battery. Loaded “Cartridge style”. Operation to “ON” mode by on/off rocker switch.
Power Consumption:
Active Mode Current: Less than 1mA (No detection)
Alarm Mode: 6.5mA (audio/visual mode)(Metal detected)
Battery Management: Precision battery monitoring. Yellow L.E.D indicator on main control panel signals low power. Continuous Red and Yellow LED indicate expired battery (In alarm mode)
Battery Life: Battery life from 1 single 9volt battery up to 360 Hrs., continuous use in audio/visual mode. (Standard Alkaline) (100 Hrs. NiCad Rechargeable) Please note: Vibration mode will run battery down faster than Audio/Visual mode).
Alarm Indication: Alarm indicated in two modes with 2-way rocker switch
(a) Audio Visual (beeper and Red LED) (b) Vibration only (tactile vibration from the handle
of the detector to the hand of operator. Detector beeps only when metal is present.
Detection Speed: Ultra fast Detect – Alarm and Reset – ready for another target: 0.1 seconds.
Target Size Indication: At constant sweep speed: short alarm = small target –
Long alarm = larger target.
Controls: (a) On/Off rocker switch (green flashing LED indicates ON mode) (b) Red LED indicates alarm mode. (c) Yellow LED indicates battery power is low and needs changing or re-charging. (d) Two way switch changing between A/V (Audio/Visual) and VIB (Vibration mode) (e) Miniature sensitivity adjustment knob.
Target Types: Detects all metals including alloys, with Instant response to all metals.
Testing: (a) Tested and approved to EEC EN5008-1 Table 1. EN50082-1 Table1:1.1 radiated emissions (CE marked). (b) Conforms to international standards IEC, NILEC, FCC, FAA. (c) Medically tested – No risk to persons with pacemakers. d) Non-interference with magnetic recorded material.
Operating Frequency: 20Khz (Sensor)
Audio Frequency: 3.4 Khz
MIT - HF-1 Series Specifications:
Construction: Neoprene - Velcro (HF1-Kevlar & Neoprene)
Dimensions: Medium or Large, standard generic size. (HF-1 Large, XL, XXL)
Operating Frequency: 20kHz
Weight: 5.2oz (149g) including battery.
Sensitivity: Target Size 0.5 grams.
Controls: Fully Automatic - (No Sensitivity Adjustment Required – Factory pre-set)
Operating Temperature: -20C to +65C
Storage Temperature: -30C to +80C
Humidity: 98%
Ingress Progression: IP64 (IEC 529 ) (Waterproofing & environmental protection)
Operating Time: Up to 3 months with normal use. 48 hours continuous at +25C (alkaline battery) 40 hours continuous at +25C (single rechargeable battery charge). Instant response to all metals.
Battery: Standard 9 volt block battery, MN 1604, 6LR61 or equivalent alkaline disposable or rechargeable. When the battery is exhausted a continuous tactile alarm signal is produced Battery inserted inside water resistant neoprene & Velcro pocket. No visible wires.
Tested and approved to EEC EN5008-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions (“CE” mark) Medically tested and approved - No risk to persons with pacemakers. Non- interference to magnetic recorded material. Alarm indication by means of vibrating tactile indicator.
Detection speed: Ultra fast; ‘Detect - Alarm - Reset’ ready for another target - 0.1 second. Pinpoint target accuracy from APT search head at the base of index finger, concealed inside water resistant neoprene fabric lining. Mass proportion discrimination alarm indication: At constant sweep speed: short digital pulse = small target Long pulse = large target.
Minimum pressure push button latching switch On/Off switch operation, inside water resistant neoprene fabric layer.
Construction: Neoprene - Velcro (HF1-Kevlar & Neoprene)
Dimensions: Medium or Large, standard generic size. (HF-1 Large, XL, XXL)
Operating Frequency: 20kHz
Weight: 5.2oz (149g) including battery.
Sensitivity: Target Size 0.5 grams.
Controls: Fully Automatic - (No Sensitivity Adjustment Required – Factory pre-set)
Operating Temperature: -20C to +65C
Storage Temperature: -30C to +80C
Humidity: 98%
Ingress Progression: IP64 (IEC 529 ) (Waterproofing & environmental protection)
Operating Time: Up to 3 months with normal use. 48 hours continuous at +25C (alkaline battery) 40 hours continuous at +25C (single rechargeable battery charge). Instant response to all metals.
Battery: Standard 9 volt block battery, MN 1604, 6LR61 or equivalent alkaline disposable or rechargeable. When the battery is exhausted a continuous tactile alarm signal is produced Battery inserted inside water resistant neoprene & Velcro pocket. No visible wires.
Tested and approved to EEC EN5008-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions (“CE” mark) Medically tested and approved - No risk to persons with pacemakers. Non- interference to magnetic recorded material. Alarm indication by means of vibrating tactile indicator.
Detection speed: Ultra fast; ‘Detect - Alarm - Reset’ ready for another target - 0.1 second. Pinpoint target accuracy from APT search head at the base of index finger, concealed inside water resistant neoprene fabric lining. Mass proportion discrimination alarm indication: At constant sweep speed: short digital pulse = small target Long pulse = large target.
Minimum pressure push button latching switch On/Off switch operation, inside water resistant neoprene fabric layer.
